Spring Seat (also called Spring Isolator, Spring Spacer) located on the exterior of the shock absorber body or at the upper end of the piston rod. It is used to position and support the suspension coil spring, typically in contact with the lower or upper end of the spring within the shock absorber assembly. Made from NR, NBR,EPDM, PU,HDPE,TPE with or without metal bonded,

FunctionsWithstands the vertical load transmitted by the spring and evenly transfers the load to the shock absorber body or vehicle body. It also limits lateral displacement of the spring, preventing interference between the spring and surrounding components.

Service LifeNo less than 80,000 km or 2 years

Quality Warranty & Standards

· Complies with IATF 16949 system. Dimensional tolerances, weld strength, and coating adhesion are controlled.

· 1-2‑year or 80,000 km warranty

Customization (Samples or Drawings Accepted)

Customization of different diameters, heights, and mounting hole positions is supported based on drawings or samples.