Honda Strut Bump Stop 51722-SMG-E04: The Front Jounce Bumper Explained The Honda strut bump stop with OE number 51722-SMG-E04 is the front axle spring bumper of the eighth generation Civic hatchback...

Among the wear items that keep a strut assembly working correctly, the strut bump stop is small, inexpensive, and easy to overlook — yet it takes the hit when suspension travel runs out. OE number 5...

A Honda strut bump stop is the elastomer buffer fitted over the damper rod of the front suspension. When the strut reaches full compression, the bump stop cushions the impact, protects the damper an...

Honda introduced the third generation of the CR-V, internal model code RE, for the 2007 model year and produced it through 2011. The crossover uses a MacPherson strut front axle and a compact multil...

The strut bump stop on a Honda rear axle is a small polyurethane cushion fitted over the shock absorber rod inside the rear spring seat area: it compresses when the rear suspension reaches full comp...

Strut bump stop 51722-SAA-E02 is a polyurethane suspension cushion produced in China by Bonpora and supplied worldwide under factory-direct terms. The part carries Bonpora reference 4110221 and corr...

The strut bump stop catalogued under OE number 51722-SWA-A01 belongs to the jounce-bumper family fitted to the Honda CR-V third generation — the SWA-series SUV produced from 2007 and sold in m...

Bonpora No 4110041 is a polyurethane front strut bump stop built to replace Honda OE 51722-SWE-T01 on CR-V models from the third and fourth generation. The part sits on the piston rod of the front M...

A strut bump stop is one of those small parts that decides whether a suspension repair leaves the workshop finished or comes back as a repeat job within weeks. This page describes the Honda front st...

Among Honda suspension wear parts, the strut bump stop 52722-SM4-013 is a reference that wholesalers, importers, and repair chains request repeatedly. Bonpora manufactures this part under No. 411004...

The strut bump stop is a small polyurethane component with a large responsibility: it is the final cushion inside the front suspension strut, and it prevents the damper rod from striking the top mou...

Strut bump stop 51722-SS0-004 is supplied by Bonpora, a Chinese manufacturer of polyurethane and rubber suspension components, as a replacement part produced to match the OE drawing for Honda front ...

A strut bump stop is the elastomer element that defines how a strut behaves in the last part of its compression travel. On Honda models with compact damper layouts, this small part sits over the dam...

A strut bump stop is a small but decisive part of the suspension system. It sits on the piston rod of the strut, inside the dust boot, and takes the last stage of suspension travel so that the pisto...

The first-generation Honda CR-V has been out of production for more than two decades, yet it still runs in large numbers across export markets, and its front suspension buffer remains a steady whole...

Older Honda platforms still generate steady parts demand, and the suspension buffer is one of the items that wears out first. When a buyer searches for OE 52722-SR3-003, the number usually comes off...

When a workshop or a distributor searches for OE 52722-SM4-9610, the enquiry is usually a precise one: the buyer already knows the application and wants a strut bump stop that seats on the same rod ...

A strut bump stop is a small moulding that decides how a Honda behaves in the last few centimetres of suspension travel. This page covers the strut bump stop supplied against Honda OE number 51722-T...

When a Honda CIVIC crosses broken pavement or a speed bump, the strut bump stop is the part that decides whether the damper survives the hit. OE 51722-TET-H01 is the polyurethane jounce bumper speci...